Starting with crawling up grizzlies at aggregate distribution sites, to truck loading at concrete production locations for highway projects, Case wheel loaders are built specifically for these jobsite tasks. With new tier 4, SCR technology, these loaders effortlessly balance on the highest banks, hold the tightest turns, and grab the largest loads while providing cooler engine operating temperatures, 10% better fuel efficiency, and more torque for tractability.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2012
Model
1121F XR - GP 6.25 Bucket with Bolt-on Edge
MSRP
Request a Quote
DIMENSIONS
Length
375 in. (9,526 mm) with bucket level on ground
Height
To Top Of ROPS Cab: 140.6 in. (3,573 mm)
Width
117.7 in. (2.99 mm) over tires
Width w/o Bucket
Overall: 117.7 in. (2.99 m) with 26.5R25 Michelin XHA2 tires
Weight
59,578 lbs. (27,024 kg)
Wheelbase
139.8 in. (3,550 mm)
Ground Clearance
20.1 in. (509.4 mm)
Turning Radius
Outside: 250.9 in. (6.37 m) with 26.5R25 Michelin XHA2 tires Turning Angle: From Center: 40° Total Angle: 80°
Tank Capacity
Transmission - Service With Filter: 48 qt. (45.4 l) Front Axle: 54 qt. (51.1 l) Rear Axle: 54 qt. (51.1 l) Engine Oil With Filter: 32 qt. (30.3 l) Cooling System: 15 gal. (56.8 l)
DRIVETRAIN
Transmission Type
Auto PS
Transmission Speed
23.2 mph (37.4 k/h)
Axles
Differential Ratio: 4.25 Planetary Ratio: 6.35 Final Axle Ratio: 27 Rear Axle Oscillation: 24° total
ENGINE
Engine Type
4-stroke, turbocharged
Engine Make
FPT
Engine Model
F2CFE614B, Tier 4 interim certified
Fuel Type
#2 diesel, (#1 and #2 mixture permitted for cold temperature), does not require ultra-low sulfur fuel, B5 biodiesel tolerant
Bore x Stroke
4.61 x 5.31 in. (177 x 135 mm)
Cylinders
6 in-line
Horsepower
Gross hp and torque per SAE J1995 Net hp and torque per SAE J1349
Gross Horsepower
347 hp (259 kW) @ 1,800 rpm
Net Horsepower
320 hp (239 kW) @ 1,800 rpm
Displacement
531 ci (8.7 l)
Torque
Gross: 1,183 ft. lbs. (1,604 Nm) @ 1,200 rpm Net: 1,148 ft. lbs. (1,557 Nm) @ 1,200 rpm
SAE Straight: 40,386 lbs. (18,319 kg) 40° Turn: 34,185 lbs. (15,506 kg)
Dig Depth
4.7 in. (119 mm)
Bucket Capacity
5.25 cu. yd. (4.01 m³) heaped
Bucket Width
125.8 in. (3,195 mm)
Height to Bucket Pin
Hinge Pin (fully raised): 191.3 in. (4,860 mm)
Dump Height
Fully Raised, 45° Dump: 142.5 in. (3,619 mm)
Dump Reach
Fully Raised, 45° Dump: 51.8 in. (1,316 mm) 7 Ft. (2.13 m) Height, 45° Dump: 95.1 in. (2,415 mm)
Dump Angle
50° fully raised
Bucket Breakout Force
50,449 lbs. (22,883 kg) with tilt cylinder
Bucket Rollback
At Ground: 42° At Carry Position: 49° At Maximum Reach: 66° At Full Height: 66°
Lifting Force
Lift Capacity: Full Height: 31,281 lbs. (14,189 kg) Maximum Reach: 43,163 lbs. (19,578 kg) Ground: 47,616 lbs. (21,598 kg)
Total Cycle Time
Raise With Rated Bucket Load: 6.5 sec. Dump With Rated Bucket Load: 1.4 sec. Lower (Empty): Power Down: 2.8 sec. Float Down: 2.6 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
Standard Features
