New F Series models deliver best-in-class horsepower and massive torque to deliver power to every work cycle. Four upgraded power modes let operators match available engine power to the job while saving fuel. Stronger and faster hydraulics deliver superior productivity and performance.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2012
Model
1021F Z-Bar - GP 4.75 Bucket with Bolt-on Edge
MSRP
Request a Quote
DIMENSIONS
Length
345.4 in. (8,774 mm) with bucket level on ground
Height
To Top of Cab: 140.6 in. (3,573 mm)
Width
Centerline Tread: 88.6 in. (2.25 m) Over Tires: 117.7 in. (2.99 m)
Width w/o Bucket
Overall: 117.7 in. (2.99 m) with 26.5R25 Michelin XHA2 tires
Weight
53,791 lbs. (24,399 kg)
Wheelbase
139.8 in. (3,550 mm)
Ground Clearance
20.1 in. (509.4 mm)
Turning Radius
Outside: 250.9 in. (6.37 m) with 26.5R25 Michelin XHA2 tires Turning Angle: From Center: 40° Total Angle: 80°
Tank Capacity
Transmission - Service With Filter: 48 qt. (45.4 l) Front Axle: 54 qt. (51.1 l) Rear Axle: 54 qt. (51.1 l) Engine Oil With Filter: 32 qt. (30.3 l) Cooling System: 15 gal. (56.8 l)
DRIVETRAIN
Transmission Type
4F / 3R proportional with Electronic Control Module torque sensing autoshift / manual shift and modulation
Axles
Differential Ratio: 4.25 Planetary Ratio: 6.35 Final Axle Ratio: 27 Rear Axle Oscillation: 24° total
ENGINE
Engine Type
4-stroke, turbocharged
Engine Make
FPT
Engine Model
F2CFE614C
Fuel Type
#2 diesel, (#1 and #2 mixture permitted for cold temperature), does not require ultra-low sulfur fuel, B5 biodiesel tolerant
Bore x Stroke
4.61 x 5.31 in. (177 x 135 mm)
Cylinders
6 in-line
Horsepower
Gross hp and torque per SAE J1995 Net hp and torque per SAE J1349
Gross Horsepower
320 hp (239 kW) @ 1,800 rpm
Net Horsepower
296 hp (221 kW) @ 1,800 rpm
Displacement
531 ci (8.7 l)
Torque
Gross: 1,091 ft. lbs. (1,479 Nm) @ 1,200 rpm Net: 1,059 ft. lbs. (1,435 Nm) @ 1,200 rpm
Fully Raised, 45° Dump: 46.2 in. (1,175 mm) 7 Ft. (2.13 m) Height, 45° Dump: 72 in. (1,828 mm)
Dump Angle
53° fully raised
Bucket Breakout Force
49,860 lbs. (22,616 kg) with tilt cylinder
Bucket Rollback
At Ground: 45° At Carry Position: 49° At Maximum Reach: 69° At Full Height: 65°
Lifting Force
Lift Capacity: Full Height: 31,180 lbs. (14,143 kg) Maximum Reach: 44,580 lbs. (20,221 kg) Ground: 52,679 lbs. (23,898 kg)
Total Cycle Time
Raise With Rated Bucket Load: 6.2 sec. Dump With Rated Bucket Load: 1.3 sec. Lower (Empty): Power Down: 2.8 sec. Float Down: 2.6 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
Standard Features
