You’ll feel the power with Case E Series wheel loaders. They keep you moving with standard dual limited-slip axles and best-in-class maintainability and serviceability. The sloping, tilt-up rear hood provides best in industry visibility while closed and exceptional component access when raised. Match the cab environment to your preferences with a tilt steering column, infinitely adjustable seat, arm rests and control placement. Ride Control™ improves productivity and material retention while reducing shock loads on the machine and operator.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2012
Model
621E XT - GP 3.0 ACS Bucket with Edge
MSRP
Request a Quote
DIMENSIONS
Length
298.9 in. (7,593 mm) with bucket level on ground
Height
To Top of ROPS Cab: 133.6 in. (3,393 mm) To Drawbar: 39 in. (992 mm) Operating - Fully Raised with Spillguard: 215.8 in. (5,482 mm)
Width
Centerline Tread: 76.8 in. (1,950 mm)
Width w/o Bucket
Overall: 99.3 in. (2,523 mm)
Weight
28,709 lbs. (13,022 kg) with ROPS cab with heater and A/C, full counterweight, 20.5R25 XTLA Michelin tires, 2.5 cu. yd. (1.96 cu. m) ACS loader bucket, standard batteries, full fuel, 175 lb. (79 kg) operator
Wheelbase
114.2 in. (2,900 mm)
Ground Clearance
14.4 in. (365 mm)
Turning Radius
Outside: 206.7 in. (5,250 mm) with 20.5 x 25 L2/L3/XTLA TL tires Turning Angle: From Center: 40° Total Angle: 80°
Tank Capacity
Transmission - Service with Filter: 5 gal. (18.9 l) Front and Rear Axle: 23.2 qt. (22 l) Engine Oil with Filter: 13.9 qt. (13.2 l) Cooling System (-40): 38 qt. (36 l)
DRIVETRAIN
Transmission Type
4F / 3R proportional with Electronic Control Module torque sensing auto shift / manual shift and modulation
Axles
Front and rear axle Differential Ratio: 3.18 Planetary Ratio: 6.40 Final Axle Ratio: 20.36 Differential: Limited slip with 45% transfer on front and rear axles
ENGINE
Engine Type
4-stroke, turbocharged
Engine Make
Case Family IV
Engine Model
667TA/EDB, Tier III certified
Fuel Type
#2 diesel, electronic fuel injection with replaceable, full flow
spin-on cartridge fuel filter
Bore x Stroke
4.11 x 5.20 in. (104 x 132 mm)
Cylinders
6
Horsepower
Gross hp and torque per SAE J1995 Net hp and torque per SAE J1349
Gross Horsepower
Max Power: 172 hp (128 kW) @ 1,800 rpm Standard Power: 156 hp (116 kW) @ 1,800 rpm Economy Power: 133 hp (99 kW) @ 1,500 rpm
Net Horsepower
Max Power: 162 hp (121 kW) @ 1,800 rpm Standard Power: 146 hp (109 kW) @ 1,800 rpm Economy Power: 125 hp (93 kW) @ 1,500 rpm
Displacement
409 ci (6.7 l)
Torque
Max Power: Gross: 538 ft. lbs. (730 Nm) @ 1,600 rpm Net: 510 ft. lbs. (692 Nm) @ 1,600 rpm Standard Power: Gross: 530 ft. lbs. (719 Nm) @ 1,300 rpm Net: 508 ft. lbs. (689 Nm) @ 1,000 rpm Economy Power: Gross: 527 ft. lbs. (715 Nm) @ 1,200 rpm Net: 508 ft. lbs. (689 Nm) @ 1,200 rpm Torque Rise: 33%
ISO Straight: 19,489 lbs. (8,840 kg) 40° Turn: 16,869 lbs. (7,652 kg)
Bucket Capacity
3 cu. yd. (2.4 cu. m)
Height to Bucket Pin
Hinge Pin (fully raised): 155.8 in. (3,956 mm)
Dump Height
Fully Raised, 45° Dump: 109.9 in. (2,792 mm)
Dump Reach
Fully Raised, 45° Dump: 48.7 in. (1,141 mm) 7 Ft. (2.13 m) Height, 45° Dump: 66.7 in. (1,694 mm)
Dump Angle
55° fully raised
Bucket Breakout Force
24,298 lbs. (11,021 kg) dump cylinder
Lifting Force
Lift Capacity: Full Height: 14,316 lbs. (6,494 kg) Maximum Reach: 20,401 lbs. (9,254 kg) Ground: 36,131 lbs. (16,389 kg)
Total Cycle Time
Raise with Rated Bucket Load: 6.3 sec. Dump with Rated Bucket Load: 1.7 sec. Lower (empty): Power Down: 4.7 sec. Float Down: 4.6 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
Standard Features
