Case compact wheel loaders offer Versa-Boom linkage for excellent reach, visibility and precise parallel lift. Get greater material retention with increased bucket roll back. A comfortable cab keeps you in the seat longer. For fast daily checks, you have easy access to service points at ground level. These machines are ideal for landscaping, industrial material handling and residential construction applications.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2012
Model
121E - 1.05 GP Bucket with Bolt-on Edge
MSRP
Request a Quote
DIMENSIONS
Length w/Bucket
214 in. (5,435 mm) bucket level on ground
Height
To Top of ROPS Cab: 111.2 in. (2,824 mm) Operating Height - Fully Raised with Spillguard: 166.8 in. (4,237 mm)
Width
Centerline Tread: 60.1 in. (1,526 mm)
Width w/o Bucket
75.2 in. (1,909 mm)
Weight
Operating Weight - Versa-Boom: 10,849 lbs. (4,921 kg) with ROPS cab with heater, standard counterweight, 14.5 x 20 Dunlop tires,
front and rear fenders, 1.05 cu. yd. (0.8 cu. m) general purpose loader bucket with edge, full fuel, 165 lb. (75 kg) operator Counterweight (optional): 11,268 lbs. (5,066 kg) Bucket: 875 lbs. (397 kg)
Wheelbase
88.6 in. (2,250 mm)
Ground Clearance
Under Shaft: 16 in. (415 mm) Under Axles: 13 in. (330 mm)
Turning Radius
Outside: 156 in. (3,963 mm) with 14.5 x 20 tires
DRIVETRAIN
Transmission Type
Hydrostatic
Number of Speeds
2
Axles
Front Axle: Differential Ratio: 2.91 Planetary Ratio: 6
Final Axle Ratio: 17.45
ENGINE
Engine Type
4-stroke
Engine Make
Case
Engine Model
432T/M3
Fuel Type
#2 diesel, direct fuel injection with replaceable, full flow spin-on cartridge fuel filte
Bore x Stroke
3.89 x 4.09 in. (99 x 104 mm)
Cylinders
4
Gross Horsepower
64 hp (48 kW) @ 2,300 rpm, rated (per ISO 9249)
Net Horsepower
60 hp (45 kW) @ 2,300 rpm, rated (per ISO 9249)
Displacement
195 ci (3.2 l)
Torque
Gross: 192 ft. lbs. (260 Nm) @ 1,400 rpm (per ISO 9249) Net: 189 ft. lbs. (256 Nm) @ 1,400 rpm (per ISO 9249) Torque Rise @ 2,000 RPM: 31%
Cooling
Oil
Fuel Tank Capacity
26 gal. (100 l)
Rated Speed
2,300 rpm, full load Low Idle: 825 - 875 rpm High Idle, No Load: 2,450 - 2,550 rpm
Speed Forward
Low: 0-3.7 mph (0-6 kph) High: 0-12.4 mph (0-20 kph) With 14 x 20 tires
Speed Reverse
Low: 0-3.7 mph (0-6 kph) High: 0-14.2 mph (0-20 kph) With 14 x 20 tires
Straight: 7,691 lbs. (3,489 kg) Straight with Optional Counterweight: 8,253 lbs. (3,744 kg) 40° Turn: 6,815 lbs. (3,091 kg) 40° Turn with Optional Counterweight: 7,209 lbs. (3,306 kg)
Dig Depth
2.3 in. (60 mm)
Bucket Capacity
Struck: 0.85 cu. yd. (0.65 cu. m) Heaped: 1.05 cu. yd. (0.80 cu. m)
Bucket Width
Outside: 80.7 in. (2,050 mm)
Height to Bucket Pin
Fully Raised: 130 in. (3,302 mm)
Dump Height
Fully Raised, 45° Dump: 101.7 in. (2,584 mm)
Dump Reach
Fully Raised, 45° Dump: 31 in. (787 mm) 7 Ft. (2.13 m) Height, 45° Dump: 45.2 in. (1,148 mm)
Dump Angle
Fully Raised: 44° Maximum Grading Angle with Bucket - Back Dragging: 105°
Bucket Breakout Force
10,024 lbs. (4,547 kg) with tilt cylinder
Bucket Rollback
Ground: 46° Carry Position: 52° At Maximum Reach: 53° At Full Height: 54°
Lifting Force
Full Height: 6,034 lbs. (2,737 kg) Maximum Reach: 8,283 lbs. (3,757 kg) Ground: 12,173 lbs. (5,522 kg)
Total Cycle Time
Raise with Rated Bucket Load: 6 sec. Dump with Rated Bucket Load - Versa-Boom: 1 sec. Lower (empty) - Float Down: 3 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
Standard Features
